Alemlube 51037M Техническое руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Техническое руководство пользователя для Системы смазки Alemlube 51037M. Alemlube 51037M 7 страниц. Auto shut off nozzle with digital meter

Печатать страницу

3.4 MODIFY THE CORRECTION FACTOR IN FIELD

PLEASE CAREFULLY FOLLOW THE PROCEDURE INDICATED BELOW.

Wait for the meter to go to standby.

Reset the resettable total.

Start dispensing into a measuring glass.

Stop dispensing when over 5 Litres of volume is

reached, read out the actual value. The volume that

is displayed on the LCD is the Display Value, not the

Actual Value which may be slightly higher. For

example, in the figure on the right, the Display Value

is 18.96 while the Actual Value is 20.75.

Press the MENU key. Keep it pressed until showed

as the right fig., the digit flash in

RESET key to choose the right digit from 0 to 9.

Press the MENU key to go the the next digit so that

the Actual Value can be input.

Make sure the correction factor is right and then

press the MENU key. Keep it pressed until calibration

is finished and the factor is save. The meter will then

return to standby.

NSW

QLD/PNG

TEL: (02) 9939 0711

TEL: (07) 3204 9166

FAX: (02) 9939 0411

FAX: (07) 3204 1224

Visit our website at

Instructions for the 51037M

�one, Press the

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

www.alemlube.com.au

SA/NT

TEL: (08) 9302 4199

TEL: (08) 8241 7111

FAX: (08) 9303 2095

FAX: (08) 8241 7011

Email - [email protected]

TEL: (09) 447 1007

FAX: (09) 447 1008