Alemlube EL SERIES Техническое руководство пользователя - Страница 4

Печатать страницу

Alemlube EL SERIES Техническое руководство пользователя

How to Use

Directly fit the pump into the Drum.

1. Insert the suction tube of pump into the drum and secure with the ring nut. It is suitable for commercial drums

with a 57mm diameter hole and with threading 2" BSP

2. Fit an oil delivery tube for the oil outlet using only high quality tubes – normally 1/2", according to DIN-SAE norms,

by means of a 1/2" BSP threading fitting.

3. Connect the delivery tube with the delivery pistol using suitable pipe fittings.

4. Air inlet connection is with a 1/4" quick plug (or 1/4" NPT female) in all versions. Compressed air connection

(to be supplied by the customer) should be done using a suitable tube.

5. A pressure regulator is used to keep the pump's working pressure at the best possible level (maximum 5-10 bar)

between the pump and the compressed air line

6. The cut-off switch can enable the operator to stop the pump at any given moment by cutting the air supply

off between the pump and the compressed air line

Extension Transfer

Part List

Part No. Description

Oil Pump

Bung Adapter

3-1

Top Connection

3-2

Extension 500mm Tube

3-3

Extension Sleeve

3-4

Extension 200mm Tube

3-5

Foot Connection

Foot Valve

Filter

Proceed as follows:

1. Depending on the length of the suction tube the desired extension length can be realised by using the modular

extension elements (See the examples given above)

2. Example of possible application to pump with drum or rigid suction tube for obtaining personalised lengths

according to needs.

3. Remove filter and foot valve from the stub pump, screw the extension tube on, then screw filter and foot valve

onto the extension tube.

NSW/ACT

QLD/PNG

TEL: (02) 9677 1555

TEL: (07) 3204 9166

FAX: (02) 9675 1155

FAX: (07) 3204 1224

OWNER'S TECHNICAL MANUAL

5:1 Air-operated Oil Pump

Quantity

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

Visit our website at

www.alemlube.com.au

SA/NT

TEL: (08) 9302 4199

TEL: (08) 8241 7111

FAX: (08) 9303 2095

FAX: (08) 8241 7011

www.alemlube.co.nz

O300140

TEL: (09) 447 1007

FAX: (09) 447 1008