Airstar SIROCCO REDTECH 1300 Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Осветительное оборудование Airstar SIROCCO REDTECH 1300. Airstar SIROCCO REDTECH 1300 8 страниц.

Печатать страницу

LED MODULE

⇒ It is important to replace any damaged led module.

⇒ The replacement of a led module has to be done in the AIRSTAR network, please contact your AIRSTAR reseller.

ENVELOPE

⇒ A damaged envelope must immediately be repaired or replaced.

⇒ Regularly clean the envelope with mild soap and water. Citrus-based cleaners can be used, although be sure to test a small area

before cleaning entire envelope.

How to change an envelope

Remove the old envelope

⇒ Open the zipper

⇒ Unscrew the nut on top of the envelope

⇒ Remove the envelope from the bottom to the top

Patching A Hole

⇒ Make sure to thoroughly clean the area to be patched.

⇒ Cut a square out of the included self-adhesive fabric sheet just large enough to cover the damaged part of the envelope.

⇒ Remove the protective film from the adhesive side of the patch material.

⇒ Carefully place the patch onto the damaged part of the envelope, inside and outside the envelope.

⇒ Firmly applying pressure to the areas of contact around the patch edge.

CLEANING THE AIR FILTER

⇒ Under the south pole plate, remove the rain cover protection and its 3 screws.

⇒ Remove sponge-type air filter by sliding it along the support stand.

⇒ Wash it or replace it.

⇒ Put back the clean air filter.

⇒ Put back the rain cover protection and its 3 screws.

18-07-2022 / A-00222-A

MAINTENANCE

Install a new envelope

⇒ Place the new envelope from top to bottom

⇒ Loosely screw the nut on top of the envelope

⇒ Close the zipper

⇒ Tighten the nut on top of the envelope

REPAIR KIT