Drazice OKCE 160 NTR Руководство по эксплуатации и установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Котел Drazice OKCE 160 NTR. Drazice OKCE 160 NTR 18 страниц. Tank-type water heater for vertical mounting
Также для Drazice OKCE 160 NTR: Руководство по эксплуатации и установке (13 страниц), Руководство по эксплуатации и установке (19 страниц)

1 TECHNICAL SPECIFICATION OF PRODUCT

The heater is designed for accumulation heating of service water using electricity. Water is heated by

an electric element in an enamelled thermally insulated tank at the time defined by the power supplier.

The element is at the time of heating controlled by a thermostat the temperature of which can be adjusted

continuously (within the range between 5°C and 74°C). Once the selected temperature is reached, heating

interrupts automatically. Water accumulated in the tank is then used for consumption. The tank keeps

constant pressure of water from the water main. If the combination faucet hot water valve is opened,

water from the water supply conduit pressed out by cold water pressure flows out of the heater. Hot water

flows out through the top part, and water flowing in remains in the bottom part of the heater. Pressure

principle allows hot water withdrawal at any place from the heater.

Consumption of hot water in households depends on the number of people, amount

of sanitary equipment, length, diameter and insulation of piping in the flat, or on individual

habits of users. The cheapest option of water heating comes at the time when

the electricity rate is reduced.

Find out in what time intervals your electricity supplier provides reduced tariff and,

depending on that information, select relevant volume and power input of the heater so that

your hot water consumption covered the needs of your household.

Hot utility water reservoir is insulated by means of top-quality polyurethane foam with zero

CFCs content. Adjust the temperature of the heater's thermostat to that level only that you

need to run your home. Thus you will reduce electricity consumption, as well as the amount

of lime sediments on the walls of the receptacle and on the electric element's pit.

If no heated water is taken from the tank, a small amount of heat leaks. This loss is

measured for a period of 24 hours at the temperature of 65°C in the heater, and at 20°C

in its ambient area. The resulting value is expressed in [kWh/24h] and indicates the amount

of power needed to maintain the set temperature.

- 4 -