ANCEL AJ400 Руководство - Страница 12

Просмотреть онлайн или скачать pdf Руководство для Испытательное оборудование ANCEL AJ400. ANCEL AJ400 13 страниц. Gdi injector cleaner & tester

ANCEL

1- Injector Cleaner & Tester; 2-Engine; 3- Fuel-return hose from engine; 4- Fuel-inlet hose to engine;

5-Auto filter; 6-Engine fuel supply hose; 7-Engine fuel return hose; 8-Fuel pump; 9-Fuel tank

Connection without fuel-return hose:

1) Disconnect the fuel supply hoses (E, F) of the engine fuel system (when disconnecting the fuel line connectors,

cover them with towels), and then choose a suitable connector, connect it to the E end and reconnect the fuel

outlet hose of the device. Hang the fuel return hose.

2) Block the other end of the disconnected end (F) with a stopper (for fuel pump with fuel return function only)

or remove the fuse of fuel pump or disconnect the power cable of engine fuel pump.

1- Injector Cleaner & Tester; 2-Engine; 3-Stopper; 4- Fuel-inlet hose to engine;

Tidy up after cleaning

After the on-vehicle cleaning is completed, turn off the ignition switch of the vehicle. Restitute the hose

connection, start the engine and accelerate properly to check if there is any fuel leakage at the connectors or in

the hoses.

Please clean the fuel tank and the lines of the device with test solution at the end of the on-vehicle cleaning, the

specific procedures are: drain the detergent left in the fuel tank first and dispose it according to its cleanliness.

Add a small amount of test solution into the fuel tank, connect the fuel outlet hose of the device to the fuel return

port and power on the device. Select "Leakage test" item and press RUN key to run the device for about 2∼3

minutes. After the running has stopped, drain the test solution from fuel tank and dispose the drained liquid

according to relevant regulations.

Clean up the site and tidy up the washing machine for later use.

Note:

When cleaning, care must be taken as the detergent is inflammable. Prepare at least one effective fire extinguisher.

Be sure that all lines are well connected and there is no leakage before performing cleaning.

VI. Transporting and Storing

6.1

5-Fuel tank;6-Fuel filter; 7- Engine fuel supply hose; 8-Fuel pump

AJ400 GDI Injector Cleaner & Tester