Form Factor Audio Bi 500 Di Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Form Factor Audio Bi 500 Di. Form Factor Audio Bi 500 Di 7 страниц.

Rear Panel:

Power In - Power in connector / Use cable with lockable (Power Con) connector supplied by factory.

Speaker Output - Speakons. Standard chassis connectors for loudspeakers.

Direct Output Post-EQ- X LR. Balanced Direct Out.

The signal goes after the preamplifier with all the corrections. In this case, Gain influences the level of the output

signal. On the other hand, the Master does not affect the output signal. This allows you to adjust the sound in the

concert hall (FOH), and then use the Master level for comfortable sound on stage. If the Mute Button is pressed

the signal still passes to the Direct Output-Post-EQ output. This allows you to adjust the sound in the hall with

no sound on the stage (like during sound check)

Direct Output Pre-EQ X LR. Balanced Direct Out.

The signal goes straight from the bass guitar to the Direct Output-Pre-EQ. In this configuration, Gain control,

Master control, EQ section, do not affect the signal level or coloration of the sound. The sound engineer selects

the signal level and all corrections in the PA system. If the Mute Button is pressed the signal still passes to the

Direct output #1-Pre-EQ output. This allows you to adjust the sound in the concert hall (FOH) with no sound on

the stage (like during sound check).

Optional for touring and international Market :

Voltage Selector Switch 110V/220.

Fuse Holders for 115V and 220V