Bosch 125 A Оригинальное руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Электроинструмент Bosch 125 A. Bosch 125 A 11 страниц. Gex professional
Также для Bosch 125 A: Оригинальное руководство по эксплуатации (13 страниц)
Печатать страницу
OBJ_BUCH-424-004.book Page 14 Tuesday, March 15, 2011 3:24 PM
14 | English
Technical Data
Random Orbital Sander
GEX ... Professional
Article number
Dust box included in delivery scope
Preselection of orbital stroke rate
Rated power input
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding plate diameter
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 75 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) determined accord-
ing to EN 60745:
Vibration emission value a
= 4.0 m/s
h
2
K = 1.5 m/s
.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or poorly main-
tained, the vibration emission may differ. This may signifi-
cantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
1 609 929 Y19 | (15.3.11)
125 A
125 AC
0 601 ... 372 0..
372 4..
–
–
W
340
340
-1
min
12000 4500–12000 4500–12000 4500–12000 4500–12000
-1
min
24000 9000–24000 9000–24000 9000–24000 9000–24000
mm
5.0
5.0
mm
125
125
kg
1.9
2.0
/II
/II
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2004/108/EC,
2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
2
, Uncertainty
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 15.12.2010
Assembly
Before any work on the machine itself, pull the mains
plug.
Replacing the Sanding Sheet (see figure A)
When attaching a new sanding sheet, remove any dust or
debris from the sanding plate 8, e.g., with a brush.
The surface of the sanding plate 8 is fitted with Velcro backing
for quick and easy fastening of sanding sheets with Velcro ad-
hesion.
Press the sanding sheet 10 firmly against the bottom side of
the sanding plate 8.
To ensure optimum dust extraction, pay attention that the
punched holes in the sanding sheet match with the holes in
the sanding plate.
125 AC
150 AC
372 5..
372 6..
–
340
340
5.0
4.0
125
150
2.0
2.1
/II
/II
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools
150 AC
372 7..
–
340
4.0
150
2.1
/II