Anchor ProLink Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Система внутренней связи Anchor ProLink. Anchor ProLink 4 страницы. Wireless intercom system

Печатать страницу

A MESSAGE FROM THE OWNER

Thank you for choosing an Anchor Audio wireless intercom system. Our products incorporate state-of-the-art design and the fin-

est quality of materials and workmanship. We're proud of our products and appreciate the confidence which you have shown

by selecting an Anchor system.

I hope you'll take a few minutes to review this manual. We've incorporated several unique features into our products, and your

knowledge of how to use them will enhance the performance and your enjoyment of the system.

Janet Jacobs, President

on behalf of all Anchor Employees

GETTING STARTED

Please check your new unit carefully for any damage which may have occurred during shipment. Each Anchor product is care-

fully inspected at the factory and packed in specially designed boxes for safe transport.

Notify the freight carrier immediately of any damage to the shipping box or product. Repack the unit in the original box and

wait for inspection by the carrier's claim agent. Notify your dealer of the pending freight claim.

NOTE: All damage claims must be made with freight carrier!

RETURNING SYSTEMS FOR SERVICE OR REPAIR

For service or repair, please contact the dealer where system was purchased or Anchor Audio Customer Service (800/262-4671

or 310/784-2300) to obtain a RA (Return Authorization) number. All shipments to Anchor Audio must include RA number and

be shipped prepaid. C.O.D. shipments will be refused and returned at your expense.

Customers outside the USA must contact dealer where system was purchased for service or repair instructions.

IMPORTANT: Save shipping box & packing materials, they're specially designed to ship

WARRANTY REGISTRATION & INFORMATION

Please go to our website, www.anchoraudio.com, and select "Warranty Registration". Completing this online registration form

will activate your limited two-year warranty.

Warranty is void if the belt pack case or headset has been opened, screws have been removed or there is evidence of tampering.

Waste electrical and electronic products must not be disposed of with household

waste. Please recycle where facilities exist. Check with your Local Authority or

Retailer for recycling advice.

your unit!

FREQUENTLY ASKED QUESTIONS

Can I use my own headset?

Yes. The ProLink is designed to work with dynamic microphone elements. (Shields can be connected to chassis ground pin.)

Headset pin configuration: 1=Mic(-), 2=Mic(+), 3=Headphone(-), 4=Headphone(+)

I've run out of battery life, now what?

You can substitute "AA" alkaline batteries rechargeable batteries. However, connecting the charger to the belt pack when

alkaline batteries are installed could seriously damage your belt pack.

Can my ProLink work with other wireless intercom systems?

No. ProLink uses proprietary design and software exclusive to the product.

Can my ProLink work with wired intercom systems?

Yes. ProLink uses WingMAN 9000 as a modular link to PortaCom and other two-wire intercoms.

Can someone eavesdrop on my conversation?

The proprietary software makes it difficult for anyone to penetrate the wireless network. Anchor offers an encrypted model for

additional security.

If I break my headset, what do I do?

The H-2000 and H-2000S headsets are covered by a 2-year warranty. Follow the instructions in the Getting Started section on

page 2 for Return Authorization. ProLink headsets are sold separately if a replacement is needed.

Can I add belt packs to my network?

Your intercom network can operate with one Master belt pack and up to three REMOTE belt packs.

TROUBLESHOOTING

Can't hear a person speaking?

First, verify that the MASTER belt pack is ON and within range of each of the REMOTE belt packs. Second, increase headset

volume using the headset volume knob on the top of the belt pack. In extremely loud environments, you will need to use the

dual ear muff headset with noise cancelling properties. If you still can't hear, your batteries may be dead. Also, verify each

belt pack is on the same channel.

Microphone not picking up your voice?

First, adjust the microphone sensitivity setting on the top of the belt pack by turning the blue button incrementally until you

reach desired sensitivity level. Move the microphone closer to your mouth and speak up clearly. For example, some people

speak softer than others and need a more sensitive microphone level.

Background noise transmitting across system?

Reduce the microphone sensitivity setting by turning the blue button until you reach the desired level.

Transmission is weak?

Your rechargeable batteries may be running low. If batteries are weak, the green LED on the top panel will flash. Your belt

pack batteries need to be recharged. If you need to keep working, you can use disposable alkaline batteries.

Proper intercom usage

Up to 4 people may talk at once. Use proper intercom etiquette – don't "talk over" others while they are speaking. Also,

position the microphone to pick up a minimum of breath noise.