Anchor Beacon BEA-8000C Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Акустическая система Anchor Beacon BEA-8000C. Anchor Beacon BEA-8000C 11 страниц.
Печатать страницу
Beacon® Sound System Owners Manual
General Warning or Caution
The Exclamation Symbol in the figure above appears in Warning and Caution
tables throughout this document. This symbol designates an area where
personal injury or damage to the equipment is possible.
Electric Shock
The Electrical Shock Symbol in the figure above appears throughout this manual.
This symbol indicates a hazard arising from dangerous voltage. Any mishandling
could result in irreparable damage to the equipment, and personal injury or
death.
Electrical Shock Symbol
Protective Conductor Terminal
The Electrical Shock Symbol in the figure above appears throughout this manual.
This symbol indicates a hazard arising from dangerous voltage. Any mishandling
could result in irreparable damage to the equipment, and personal injury or
death.
Figure Protective Conductor
Terminal Symbol
European Union CE Mark European Union CE Mark
The presence of the CE Mark on Anchor equipment means that it has been
designed, tested and certified as complying with all applicable European Union
(CE) regulations and recommendations.
Alternating voltage symbol
The presence of the CE Mark on Anchor equipment means that it has been
designed, tested and certified as complying with all applicable European Union
Figure Alternating Voltage
Symbol
(CE) regulations and recommendations.
Fuses
The fuse symbol in the figure above identifies the fuse location on the Anchor
Figure Fuse Symbol
System. (Not required if not user replaceable)
On Symbol
The On Symbol in the figure above represents a power switch position on the
Anchor System. This symbol represents a Power On condition.
Figure On Symbol
O
Off Symbol
The Off Symbol in the figure above represents a power switch position on the
Anchor System. This symbol represents a Power Off condition.
Figure Off Symbol
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product or on its packaging indicates that this product
must not be disposed of with regular waste. Instead, it is the user responsibility
to dispose of waste equipment according to the local laws. The separate
collection and recycling of the waste equipment at the time of disposal will help
to conserve natural resources and ensure that it is recycled in a manner that
Figure WEEE Directive Symbol
protects human health and the environment. For information about where the
user can drop off the waste equipment for recycling, please contact your local
Anchor representative. See Section for instructions on how to disassemble the
equipment for recycling purposes.
Inspection for Damage
The Model Beacon is carefully packaged at the factory to minimize the possibility
of damage during shipping. Inspect the box for external signs of damage or
mishandling. Inspect the contents for damage. If there is visible damage to
the instrument upon receipt, inform the shipping company and Anchor Inc.
immediately.
Do not attempt to operate this equipment if there is evidence
of shipping damage or you suspect the unit is damaged.
Damaged equipment may present additional hazards to you.
Contact Anchor technical support for advice before attempting
to plug in and operate damaged equipment.
Electrical Requirements
Before attempting to power up the unit for the first time, the following
precautions must be followed:
To avoid electric shock, connect the instrument to properly
earth-grounded, 3-prong receptacles only. Failure to observe
this precaution can result in severe injury.
Have a qualified electrician verify the wall socket that will be used is properly polarized and properly
grounded.
Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture,
apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
The apparatus connected to a main socket outlet with a protective earthing connection. For Nordic
markings refer to copy of marking label.
The plug in the power cord is the AC mains disconnected device and must remain readily operable. –
minimum distances around the apparatus for sufficient ventilation; the ventilation should not be impeded
by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.; no
naked flame sources, such as lighted candles, should be placed on the apparatus.
-Equipment may be located above or below this apparatus, but some equipment (like large amplifiers)
may cause an unacceptable amount of hum or may generate too much heat and degrade the
performance of this apparatus.
MADE IN USA
SIX YEAR WARRANTY
Inspection for Damage
WARNING
9