Dream Line ALLURE SHDR-4259728-01 Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Сантехническая продукция Dream Line ALLURE SHDR-4259728-01. Dream Line ALLURE SHDR-4259728-01 19 страниц. Shower door

Печатать страницу

Preparation

1. Prior to installation, examine all boxes and packages for shipping damage and compare the

piece count with your packing slip. After opening all boxes and packages read this

introduction carefully. Check that all of the needed parts are included in the package by

checking off the components on the "Detailed Diagram of Shower Door Components". If the

unit has been damaged, has a finishing defect, or has missing parts, please contact our

customer support department within 3 business days of the delivery date. Please note that

DreamLine

will not replace any damaged products or missing parts free of charge after

3 business days or if the product has been installed. Feel free to contact DreamLine

have any questions and please provide an order number, job name or other proof of purchase

to help us identify your original order.

2. If this unit is going to be installed in a new construction, install all of the required plumbing

and drainage before installing the shower. Use a competent and licensed (if required by

local code) plumber for all plumbing installation.

3. Please note that you should consult your local building codes with questions about

installation compliance standards. Building and plumbing codes may vary by location,

and DreamLine

will not accept any returns.

4. Please make sure that prior to beginning the installation, the surfaces are leveled and solid and

will be able to support the total weight of the unit. Also make sure the walls are at right angles.

Irregular installation surface level, radius corners or improper angle of side walls will result in

serious problems for your installation. Please note that some adjustments and drilling may be

necessary during the installation process.

5. Please protect all primary surfaces of the product during installation. Never set your glass

down directly onto a tile floor. Leave corner protectors in place until necessary to remove them.

Always use a piece of wood or cardboard to protect the bottom edge and corners of the glass

prior to and during installation.

This unit must be installed

7. This model has 7" of total adjustment within the model size: 1" overall width or out-of-

plumb adjustment using the strike-side wall profile and 6"of overall width adjustment using the

door pivot hardware. The pivot side wall profile should only be adjusted for out-of-plumb

conditions and not for overall width.

8. a) If the width of the opening is less than 37

the stationary glass), refer to (Diagram A) with (Packing List A).

b) If the width of the opening is greater than 37

stationary glass with glass shelves, use (Diagram A and B) with (Packing List A and B) to

complete the installation.

This model requires a minimum

Professional installation is recommended for this heavy glass frameless shower door.

10.

"Allure" manual Ver 2 04/2016

is not responsible for code compliance standards for your project and

upon a finished threshold and against finished walls.

2-1/4"

" and you are installing the door only (without

", and you are installing the door and

of flat threshold space for installation.

if you