Anchor Systems 46913 Инструкции по эксплуатации и техническая информация - Страница 7

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническая информация для Блок питания Anchor Systems 46913. Anchor Systems 46913 16 страниц. 20-30l hydraulic power pack

Печатать страницу

Have any questions?

01342 719 362

For safe use, ensure all these points are followed:

•

Always operate the machine when on level and stable ground.

•

All outriggers should be deployed to ensure machine stability.

•

Ensure all operators are wearing the required PPE.

•

All operators should be familiarly with the machine controls and operating procedure.

•

All workforce should be clear of the machine when in operation.

•

Do not block the radiator grills or exhaust pipe.

•

Do not put any hands or foreign objects into the machine.

•

Keep feet and hands clear when operating the machine.

TURNING OFF

•

Turn the flow control valve to OFF

•

If the auto throttle is locked in HIGH, unlock it

•

Turn the engine cut off switch OFF

Operating Safety

Routine Maintenance

Engine - refer to Vanguard 6.5 operator's manual for service intervals.

Oil Dipstick - located at the right side of the engine

Hydraulic return filter- Located on the left of the power pack.

Hydraulic Oil Reservoir - Oil suction filler is inside the oil reservoir. Oil level sight gauge is located

on the right side of the reservoir, oil level must be checked on a weekly basis. The power pack uses

HLP 32 Grade Hydraulic Mineral Oil.

Figure 8 - Oil Suction Filter