Formax FD 8200CC Руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измельчитель бумаги Formax FD 8200CC. Formax FD 8200CC 2 страницы. Cross-cut strip-cut

Печатать страницу

Speciﬁcations

FD 8200CC

Cutting Style:

Cross Cut

Shred Size:

1/16" x 1/2"

Sheet Capacity: 4 to 5

Speed:

16 feet per minute

Feed Opening:

8.7"

Dimensions:

16" W x 10" D x 20" H

Bin Capacity:

6 gal.

Weight:

22 lbs.

Power supply:

110-120V, 60Hz

Parts Identiﬁcation

1. Start/Off/Reverse Switch

2. Power Indicator Light

3. Basket Full Indicator Light

4. Paper Infeed

5. Optical Sensor

6. Wastebasket

7. Power Cord

8. Door Switch

Features

• Auto Start/Stop detects paper and starts shredding automatically

• Built-in overload sensor stops the motor if shredder overheats

• Reverse mode for releasing jammed paper

• Shreds paper up to 8.7" wide, including documents with staples

• Auto shut-off when wastebasket is full

• Shreds up to 5 pages at a time (FD 8200CC), and up to 9-10 pages

(FD 8200SC).

FD 8200SC

Strip Cut

1/8"

9 to 10

16 feet per minute

8.7"

16" W x 10" D x 20" H

6 gal.

22 lbs.

110-120V, 60Hz

Operation

1. Connect the power cord to an AC outlet.

2. Push the Start/Off/Reverse switch to the START position. The power

indicator will light.

3. Insert documents into the paper infeed. The cutters will start

automatically, and stop after the documents are shredded.

4. The FD 8200 shreds 4-5 sheets (Cross-Cut) or 9-10 sheets (Strip-Cut)

at a time, continuously for up to 30 minutes. After that, allow 15 minutes

for the shredder motor to cool down.

Clearing Paper Jams

A paper jam may occur in the following situations: exceeding the

recommended sheet capacity, paper is too wide for the infeed, or if paper

is not fed squarely into the infeed. To protect the unit from damage, it is

equipped with an auto shut-off, in the event of overload.

To clear the jam, follow these instructions:

1. Press the Start/Off/Reverse switch to the REVERSE position until the

paper is cleared.

2. Press the Start/Off/Reverse switch to the OFF position.

3. To resume normal operation, press the Start/Off/Reverse switch to

START.

CAUTION: If the reverse action does not clear the jammed paper, DO NOT

ATTEMPT TO OPEN THE MACHINE HOUSING. Contact your Formax

Dealer for service.

Overload Protection

To prevent damage of the shredder, the motor has been equipped with a

thermal overload mechanism. This makes the unit inoperative for a short

period of time if it becomes too warm. If this occurs, it is necessary to

unplug the unit for at least one hour before using it again.