Electrolux ESF 6146 S-Visi Книга инструкций - Страница 18

Просмотреть онлайн или скачать pdf Книга инструкций для Посудомоечная машина Electrolux ESF 6146 S-Visi. Electrolux ESF 6146 S-Visi 18 страниц.

...the wash results are not satisfactory

The dishes are not clean

The wrong washing programme has been selected.

The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.

The spray arms do not rotate freely due to wrong arrangement of the load.

The filters in the base of the washing compartment are dirty or incorrectly positioned.

Too little or no detergent has been used.

Where there are limescale deposits on the dishes; the salt container is empty or the wrong level of the water softener has been

selected.

The drain hose connection is not correct.

The salt container cap is not properly closed.

The dishes are wet and dull

Rinse aid was not used.

The rinse aid dispenser is empty.

Water drops have dried onto glasses and dishes

The detergent may be the cause. Contact the detergent manufacturer's consumer care line.

If after all these checks, the problem persists, contact your

local Electrolux Service Centre, quoting the model (Mod.),

product number (PNC) and serial number (S.N.).

This information can be found on the rating plate located on

the side of the dishwasher door (see picture).

So that you always have these numbers at hand, we

recommend you to make a note of them here:

Mod. : . . . . . . . . . . . . . . . . . .

PNC : . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . .

This product should be serviced by an authorised service

engineer, and only genuine spare parts should be used.

Under no circumstances should you attempt to repair the

machine yourself.

Repairs carried out by inexperienced persons may cause injury

or serious malfunctioning. Contact your local Electrolux

Service Centre.

Always insist on genuine spare parts.