Electrolux ESF 67060 Руководство пользователя - Страница 16

Просмотреть онлайн или скачать pdf Руководство пользователя для Посудомоечная машина Electrolux ESF 67060. Electrolux ESF 67060 20 страниц.

16 electrolux

How to remove the appliance worktop

1. Remove the rear screws (1).

2. Pull the worktop from the behind of the

appliance (2).

3. Lift the worktop and move it from the

front slots (3).

4. Use the adjustable feet to adjust the lev-

el of the appliance.

5. Install the appliance under the kitchen

worktop. Do not squash or bend the wa-

ter hoses during the installation.

To adjust the level of the appliance

A correct level of the appliance lets the door

to close and seal correctly.

With an incorrect appliance level, the door

does catches on the sides of the cabinet.

Loosen or tighten the adjustable feet to

make the appliance level.

Water drain connection

Connect the water drain hose to:

• The sink spigot and attach it under the

work surface. This prevents that the

waste water from the sink goes back into

the appliance.

• A stand pipe with vent-hole. The internal

diameter must be minimum 4 cm.

max 85 cm

min 40 cm

Remove the sink plug when the appliance

drains the water to prevent that the water

goes back into the appliance.

The drain hose extension must not be lon-

ger than 2 m. The internal diameter must

not be smaller than the diameter of the hose.

If you connect the water drain hose to a

trap spigot under the sink, remove the plas-

tic membrane (A). If you do not remove the

membrane, remaining food can cause a

blockage in the drain hose spigot

A safety device impedes the dirty water

to go back into the appliance. If, the spi-

got of the sink has a 'non-return valve',

this can cause the appliance to drain in-

correctly. Remove the non-return valve.