AND UA-621 Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Монитор артериального давления AND UA-621. AND UA-621 18 страниц.

1. Remove the battery cover.

2. Remove the used batteries and insert new batteries

into the battery compartment as shown, taking care

that the polarities (+) and (-) are correct.

3. Replace the battery cover.

Use only R6P, LR6 or AA batteries.

CAUTION

Insert the batteries as shown in the battery compartment. If not, the device will

not work.

When

(LOW BATTERY mark) blinks on the display, replace all batteries with

new ones. Do not mix old and new batteries.

It may shorten the battery life, or cause the device to malfunction.

(LOW BATTERY mark) does not appear when the batteries are drained.

Battery life varies with the ambient temperature and may be shorter at low

temperatures.

Use the specified batteries only. The batteries provided with the device are for

testing monitor performance and may have a limited life.

Remove the batteries if the device is not to be used for a long time.

The batteries may leak and cause a malfunction.

The stored data are cleared when the batteries are removed.

When the AC adapter is used for measurement, memories are cleared

after pulling out the AC adapter.

Insert the air connector plug

into the air socket firmly.

Insert the AC adapter plug into the DC jack.

Then, insert the AC adapter into an electrical outlet.

The AC adapter, the model TB-233, is sold separately.

Note: When the AC adapter is pulled out,

the memories are cleared.

Using the Monitor

Air Socket

Air Connector Plug

Air Hose

AC adapter Plug

DC Jack