Forms + Surfaces Knight Bollard Инструкции по установке - Страница 2
Просмотреть онлайн или скачать pdf Инструкции по установке для Ландшафтное освещение Forms + Surfaces Knight Bollard. Forms + Surfaces Knight Bollard 2 страницы. Security core
Печатать страницуKNIGHT
BOLLARD
TM
STEP BY STEP
FOR ALL KNIGHT SECURITY BOLLARDS
Position bollard over security core
• Inspect security core for moisture. If
moisture is present remove and dry
immediately before installing fixture. Do
not install fixture unless security core is
completely dry.
• Slide bollard over security core so lower
holes in bollard line up with holes in
security core base plate.
T 800.451.0410 | www.forms-surfaces.com
© 2016 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
a
a
a
Attach bollard to security core
• Thread 1/4"-20 x 3/4" flat head cap
screw (a) into each lower hole in bollard.
• Use 5/32" hex bit or key to tighten all
screws until snug.
SECURITY CORE INSTALLATION INSTRUCTIONS
page 2 of 2 | Rev. 08-16-16