Forms + Surfaces LIGHT COLUMN BOLLARD Инструкции по установке - Страница 2
Просмотреть онлайн или скачать pdf Инструкции по установке для Светильник Forms + Surfaces LIGHT COLUMN BOLLARD. Forms + Surfaces LIGHT COLUMN BOLLARD 3 страницы. Surface mount with j-bolts
Печатать страницуLIGHT COLUMN BOLLARD
STEP BY STEP
FOR ALL STANDARD LIGHT COLUMN BOLLARDS
c
b
Attach bollard
• Slide 1/2" washer (b), then thread 1/2"-
13 nut (c) onto each J-bolt anchor.
T 800.451.0410 | www.forms-surfaces.com
© 2016 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
SURFACE MOUNT WITH J-BOLTS INSTALLATION INSTRUCTIONS
Tighten nuts
• Use 3/4" socket and socket wrench to
tighten all nuts until snug.
BASE PLATE
Attach escutcheon cover (optional)
• Apply a thick bead of silicone RTV sealant
around the vertical edge of the base
plate.
NOTE: Leave four 1/2" gaps to allow for
water drainage.
• Lower escutcheon cover to ground level
and wipe away any excess sealant.
page 2 of 3 | Rev. 08-01-14
TOP VIEW
1/2"