ATI Audio MCDA-208 Руководство по эксплуатации и техническому обслуживанию - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Усилитель ATI Audio MCDA-208. ATI Audio MCDA-208 15 страниц. Ultra-low-jitter studio master clock dual 1x4 aes/ebu distribution amplifier
Печатать страницу
SAFETY INFORMATION
To reduce risk of electric shock, do not remove covers. There are no user-serviceable items
inside. Please refer servicing to qualified personnel.
UNPACKING
Examine all shipping cartons for external damage and retain all damaged cartons for inspection
by the carrier. Examine all equipment for any sign of damage. Do not connect AC mains power
to a unit, which appears to be damaged. Contact the carrier to file a damage claim.
INSTALLATION LOCATION
This equipment must be installed in a location meeting the environmental conditions specified
below. Adequate cooling must be provided if units are to be operated in high temperature
locations. Exposure to liquid and condensation must be avoided.
GROUNDING
This equipment is connected to earth through the center conductor of the AC mains cable.
Proper grounding protects operators from electric shock, and it must be maintained whenever
the unit is connected to AC.
ELECTROMAGNETIC COMPATIBILITY
This unit complies with electromagnetic requirements described in EMC Directive 2004/108/EC
and FCC Part 15. This unit does not generate undue electromagnetic interference, and is
adequately protected against electromagnetic interference so that it can operate properly.
MAINTENANCE
This unit requires no maintenance other than periodic wiping with a soft dry cloth to remove any
dust or contaminating substances. Do not use solvents for cleaning.
DECLARATIONS OF CONFORMITY
Class A Equipment – FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to FCC CFR 47, Part 15.
CE Declaration of Conformity
ATI Audio Inc., West Berlin, New Jersey 08091 USA, declares that all Model MCDA-208/ units
are in conformity with the following EU regulations and amendments:
Low Voltage Directive (LVD) 2006/95/EC (replaces 73/23/EEC)
Electromagnetic Compatibility (EMC): EMC Directive 2004/108/EC
EMC: EN55103-1/-2:2009, electromagnetic environments E2.
Safety: EN 60950:2006
3
!
"#$%&'()!"*+,*-!
!