Carmanah MX Series Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Осветительное оборудование Carmanah MX Series. Carmanah MX Series 20 страниц. Radar detection kit
Также для Carmanah MX Series: Руководство по установке (2 страниц), Руководство по установке (2 страниц), Руководство по замене (4 страниц), Руководство по замене (2 страниц), Руководство по замене (4 страниц), Руководство по замене (2 страниц)

Печатать страницу
3.0

Installation

The following is a summary of the installation sequence of the Radar Detection Kit:
1. Determine installation location on pole for Radar Detection Kit.
2. Install Carmanah MX system on pole per supplied instructions.
3. Install MX radar interface PCBA into MX power module.
4. Drill holes for radar cable and bolts, if required.
5. Fish radar cable, install radar and mount to pole.
6. Aim radar module.
7. Connect and configure radar module, if required.
8. Test system.
3.1
Determine Installation Location on Pole
The radar module should be mounted on the pole so that its front surface directly faces and has an unobstructed
view of oncoming traffic. The radar module cable is 9.8 ft long; to allow sufficient cable slack, the vertical distance
between the radar mount and the MX system should be at most 7 ft.
For optimal radar performance:
Mount radar at least 6 ft above the ground (for maximum range).
•
•
Minimize the angle between target traffic and the radar module.
If the radar module can't be located near the side of the road, it may need to be pointed further
up the road to detect vehicles effectively.
3.2
Install Carmanah MX system on Pole
Use the instructions supplied with your system to install the Carmanah MX system onto the pole.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
RADAR DETECTION KIT INSTALL GUIDE
|
carmanah.com
LEVEL 4
4