Carmanah F Series Руководство по замене - Страница 5

Просмотреть онлайн или скачать pdf Руководство по замене для Система безопасности Carmanah F Series. Carmanah F Series 9 страниц. Rrfb mast arm kit
Также для Carmanah F Series: Краткое руководство по эксплуатации (20 страниц), Руководство по установке (20 страниц), Руководство по установке (16 страниц), Руководство по замене системы энергоменеджмента (12 страниц), Руководство по установке (20 страниц), Руководство пользователя (18 страниц), Руководство по установке (18 страниц)

Печатать страницу
Carmanah F Series Руководство по замене

2.0 Tools and Material Overview

The following parts are included in the E / F Series replacement solar panel kits:
•
1x solar panel assembly (E or F Series)
•
2x flat washer – stainless steel, 0.058" thick
•
2x spacer, nylon
•
2x 5/32" sealing rivet – stainless steel, 0.156" OD
•
3x 1/8" sealing rivet (all three only required for F Series systems)
•
3x black cable tie
•
3x door labels (two for legacy R247-E, R920 and one for E or F Series)
•
12.9 inches of foam tape (needed for E-Series only)
•
1x 8-32 tap
•
1x #29 (0.136") drill bit
The following tools are required:
•
Hand rivet tool with #2 (1/8") and #5 (5/32") rivet nosepieces (not included)
•
8-32 tap (included, required for legacy R920/R247-E only)
•
#29 (0.136") drill bit (included, required for legacy R920/R247-E only)
•
Side cutters for cutting cable ties
•
Large drill bit for drilling rivets
•
Electrical tape or wire nuts
This replacement kit allows for solar panel replacement for the legacy R920/R247-E solar engines with horizontal
opening solar panel, and newer E Series and F Series solar engines with vertically opening solar panel.
Current version – vertical opening
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
SOLAR PANEL REPLACEMENT GUIDE
Legacy version – horizontal opening
5
|
carmanah.com