Carmanah Go Power! GP-RV-160 Руководство пользователя - Страница 10
Просмотреть онлайн или скачать pdf Руководство пользователя для Инвертор Carmanah Go Power! GP-RV-160. Carmanah Go Power! GP-RV-160 16 страниц. Expansion kits, rv solar power kits
Печатать страницуDiagram 1
Positive MC4
Junction Box
Connection - Male
Positive MC4
Cable Conductor
Positive Polarity Label
10
MC4 Power Cabels For RV Kits
Negative MC4 Junction
Box Connection - Female
Negative MC4
Cable Conductor
Cut 50' wire in
half to make
two 25' cables
gp
The MC4 power cable is usually the final connection
between the solar array and the solar controller. If it has
not already been done, cut the MC power cable into two
pieces so that there is a positive conductor cable and
negative conductor cable.
1. Cover the solar module(s) with an opaque material.
Attach the appropriate MC4 power cable conductor to the
positive and negative connectors of the MC4 junction box.
If you have more than one module, refer to the specific
diagram for wiring a parallel MC4 connection.
2. Run the positive and negative MC4 cable conductors
from the solar array to the solar controller. Attach a positive
polarity label to the end of the positive conductor. If the
positive conductor needs to be shortened and the polarity
label is removed, remember to re-label it as both positive
and negative conductors look exactly the same. Leave a
few feet of cable at the solar controller in case of future
adjustment.
Note: solar module junction box and MC4 cables many not
be exactly as shown.
electric.com
Weekender SW
GP-RV-80
GP-RV-80E
Weekender HD
GP-RV-95
GP-RV-95E
Solar Elite
GP-RV-160E
GP-RV-160
Solar Extreme