Carmanah MX Series Руководство по установке - Страница 15

Просмотреть онлайн или скачать pdf Руководство по установке для Солнечная панель Carmanah MX Series. Carmanah MX Series 20 страниц. Radar detection kit
Также для Carmanah MX Series: Руководство по установке (2 страниц), Руководство по установке (2 страниц), Руководство по замене (4 страниц), Руководство по замене (2 страниц), Руководство по замене (4 страниц), Руководство по замене (2 страниц)

Печатать страницу
4.4
Adjusting Trigger Output Configuration
Under the "DR600 Setup," "Hardware & IO Config" tab are settings that control the system's activation behavior:
Trigger Event: this setting changes the conditions under which an activation of the connected Carmanah MX
system occurs:
None: no activations will occur.
•
Default: Displayed Target Above Speed Limit (default setting): Carmanah MX system activated
•
when vehicle detected above configured Speed Limit on "Detection & Units" tab.
Displayed Target Below Speed Limit: Carmanah MX system activated when vehicle detected
•
below configured Speed Limit on "Detection & Units" tab.
•
Any Displayed Target: Carmanah MX system activated whenever a vehicle is detected, regardless
of speed.
Trigger Direction: this setting changes whether incoming vehicles, outgoing vehicles, or both will trigger the
connected Carmanah MX system. Default setting is Incoming.
Click on "Save Changes" to save the changes to the radar module, or "Close" to disconnect from
the radar module without saving.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
RADAR DETECTION KIT INSTALL GUIDE
|
carmanah.com
LEVEL 4
15