ATI Technologies Q46N Руководство по коммуникациям - Страница 14

Просмотреть онлайн или скачать pdf Руководство по коммуникациям для Измерительные приборы ATI Technologies Q46N. ATI Technologies Q46N 18 страниц.

ATI

Q46 Ethernet/IP Communications Manual

as this is the fall-back IP that has been stored in the Q46. On power up,

the Q46 will still try and find a BOOTP server for 30 seconds, and then

default to this stored value as the fallback. If you do not see your new

connection, two troubleshooting notes –

1-You must always be careful to place the new IP address on the proper

subnet level so the PC can still reach it with the settings made in step 1. If

the PC is on 192.168.0.X, then any assigned IP must be on the X level –

and don't place the Q46 on the same IP as the PC. During BOOTP server

assignment, if you place the Q46 on a vastly different IP like

10.20.120.100, you must repeat step 1 before step 6 above to place the

PC at something like 10.20.120.10. This can get tricky, as you can make

assignments anywhere, but then the PC must be re-established on that

new net to find the new assignment.

2-Remember to wait a minute before the ping test if you verify a

connection. The Q46 runs BOOTP by default on power-up, so it will be

searching for that server for about 30 seconds on power up, and then will

default to the stored IP.