ATI Technologies ATP8500.1 Дополнение к руководству пользователя - Страница 4
Просмотреть онлайн или скачать pdf Дополнение к руководству пользователя для Компьютерное оборудование ATI Technologies ATP8500.1. ATI Technologies ATP8500.1 7 страниц. Preamp/processor
Печатать страницуmove the cursor to this line, and then use the large wheel or the left/right buttons on the remote to adjust the
level of attenuation.
Reverb: This control adjusts the level of ambience in the ATP8500.1's proprietary music modes (Concert,
Club, and Natural). Use the up/down buttons on the front panel or the remote to move the cursor to this
line, then use the large wheel or the left/right buttons on the remote to adjust the reverb from Dry (no
reverb) to Wet (heavy reverb), with three steps in between.
Dolby/DTS Setup
This menu lets you adjust the effects of the DTS Neo: 6 Cinema and Music modes, and the Pro Logic II
Music mode. The control options are:
PLII Panorama: The Panorama control lets you create a greater "wraparound" effect in the Pro Logic II
Music mode. It blends the sound of the front speakers more with the surround speakers, to create the effect
of more sound coming from the sides of the room. Panorama options are limited to on/off; we recommend
the off setting for most music listening.
PLII Center Width: This is the most useful of Pro Logic II Music's three controls. It lets you blend some of
the sound from the center channel into the right and left front speakers, creating less of a "hard center"
effect. It's adjustable in 8 steps from Min (no blend/full center channel) to Max (all sound from center
blended into left and right; center speaker deactivated). Factory preset is 3, which works well for most
music and most speaker systems, but you may wish to experiment—especially if your left and right front
speakers are widely spaced, in which case a setting of 1 or 2 may be more pleasing.
PLII Dimension: This control functions somewhat like the fader in a car audio system; it adjusts the
front/back "tilt" of the system, from -3 (minimum surround effect) to +3 (maximum surround effect).
Factory preset is 0, which works well for most music, but music recordings that lack natural ambience may
sound better at a setting of +1 or +2. Likewise, highly ambient recordings, such as those from audiophile
record labels, may sound better at a setting of -1 or -2.
Neo: 6 Center Image: This control functions in the Neo: 6 Music mode. It creates a stronger or weaker
center image by adjusting the level of the left and right front speakers. The control settings vary from 0
(minimum center image) to 5 (maximum center image). Factory preset is 2, which works well for most
music and most speaker systems, but if you like a stronger center vocal sound, you might experiment with a
setting of 3 or 4.
Preset Setup