Advanced Kiosks Enviro Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Цифровые вывески Advanced Kiosks Enviro. Advanced Kiosks Enviro 20 страниц.
Installing the Kiosk Enclosure
The Enviro Kiosk should be mounted to a solid surface using appropriate anchors for adhering
objects to that surface. A specific anchor may work well for concrete but may not be appropriate
for a wooden surface. It is advised to consult a professional and reference local building codes
and regulations to determine the most appropriate or required anchor.
Location
The location for the kiosk should be on a flat level area. The kiosk needs to be fastened to a solid
surface for maximum security and safety. Failure to appropriately secure the kiosk to a floor, or
pad presents a danger of the kiosk tipping over.
Surface Grade
The surface should slope away from the kiosk to prevent the possibility of water accumulating in
the bottom of the kiosk. Standing water inside the kiosk will elevate humidity levels beyond
acceptable operating conditions.
Mounting the Kiosk
The power and the network connection must be brought into the kiosk from one of the three
entry holes in the bottom of the kiosk enclosure. For best network results, use a shielded internet
connection.
Enviro Kiosk Assembly and Operation Instructions
Holes on Bottom of Enviro Enclosure
4
www.advancedkiosks.com
Installation
3.5 Inch Diameter
Hole
3 Inch Diameter
Hole
8/27/19