Electrolux AOFP101U Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Морозильная камера Electrolux AOFP101U. Electrolux AOFP101U 11 страниц. Bcf 30kg 6 gn1/1 lw (240/3/60hz), bcf 50kg 10 gn1/1 lw (240/3/60hz) / bcf 100kg 20 gn1/1 lw (240/3/60hz) / bcf 70kg 10 gn2/1 lw (240/3/60hz) / bcf 180kg 20 gn2/1 lw (240/3/60hz) / bcf 30kg 6 gn1/1 lw (208/3/60hz) / bcf 50kg 10 gn1/1 lw (208/3/60hz) / bcf
Также для Electrolux AOFP101U: Руководство по эксплуатации и техническому обслуживанию (27 страниц)

Печатать страницу

NB (for models with on board unit): appliances with unit on

board must be handled in the upright position.

If the equipment is handled in a horizontal position, make sure

to wait a few hours before operating it. This is to give the oil time

to settle.

CAUTION:

Do not push or pull the appliance to move it, as it may tip over.

B.1.2.2 Disposing of the packaging

Packaging materials should be disposed of in accordance to

the binding laws in the country where the appliance is to be used.

Recyclable plastic parts are marked as follows:

polythene: outer wrapping, instructions booklet bag

polypropylene: straps

polystyrene foam: corner pads

B.1.3 POSITIONING

Install the equipment, taking all the safety precautions

required for this type of operation, also respecting the

relevant fire-prevention instructions.

Place the appliance in a ventilated room and away from

heat sources such as radiators or air-conditioning

systems, in order to allow the cooling of the refrigerating

unit components.

Never cover the condenser, not even temporarily, as

this may jeopardise the operation of both the condenser and the

appliance.

Should the appliance be installed in rooms where there are

corrosive substances (chlorine, etc.), it is advisable to wipe over

all the stainless steel surfaces with a cloth coated with vaseline

oil to create a protective film.

The room temperature should not exceed 89.6°F/+32°C in order

to maintain the recommended internal temperatures. Make

sure to position the appliance at least 1.97"/50mm from any

machines present in the room (in fact, close proximity can create

problems of condensation forming on the walls of the appliance),

also taking into consideration the space needed for door opening.

Pay particular attention to levelling of the floor on which the

appliance stands, in order to ensure its optimal operation.

IMPORTANT:

Level the appliance, otherwise its operation could be com-

promised.

Adjust the height and level the appliance by means of the

leveling feet, checking that the door opens and closes properly.

+50 mm

+ 1.97 "

B.1.3.1 Installation of the condensation tray (see pict. 1- 5)

-10 mm

- 0.39 "