Bosch RN175 Руководство по эксплуатации/безопасности - Страница 12

Просмотреть онлайн или скачать pdf Руководство по эксплуатации/безопасности для Электроинструмент Bosch RN175. Bosch RN175 43 страницы.

BM 2610957383 06-09:BM RN175 03-09 6/22/09 8:01 AM Page 12

Shingle Guide Adjustment

Always disconnect the air hose before

W RNING

adjusting the shingle guide. Such

precautionary safety measures reduce the risk of

unintentional tool operation.

The shingle guide is designed for consistent spacing

between shingles. To adjust the guide, push down the

shingle guide adjust button and slide the guide to desired

shingle exposure, as shown in figure 14.

Disconnect the tool from the air source

W RNING

before attempting to clear a jammed nail.

Such precautionary safety measures reduce the risk or

unintentional tool operation.

If a nail becomes jammed in the nosepiece, follow these

instructions to remove the jammed nail:

1. Release the trigger.

2. Disconnect the air supply from the tool.

3. Remove nails from the magazine as described in "Nail

Unloading."

4. Remove the jammed nails, using pliers if necessary.

5. If the driver blade is in the extended position, insert

screwdriver or other rod into nosepiece and push driver

blade into tool so that it is ready to fire, figure 15.

6. Reinsert nails into the magazine as described in "Nail

Loading".

7. Reconnect air supply as described in "Connecting Air

Supply".

NOTE: If the driver blade does not return to its up position,

disconnect air supply and contact a Bosch factory service

center or authorized Bosch service station.

NOTE: If nails continue to jam frequently in the nose piece,

contact BOSCH service center for repair.

Jam Clearing

Operation

FIG. 14

FIG. 15

Release

Button

Shingle Guide

Driver Blade