Bosch Instructions for Use Руководство по установке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по установке для Сушилка Bosch Instructions for Use. Bosch Instructions for Use 12 страниц. 24" compact condensation dryer axxis - white
Также для Bosch Instructions for Use: Руководство по установке и эксплуатации (32 страниц), Руководство по установке и эксплуатации (32 страниц), Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (8 страниц), Инструкция по установке и использованию (8 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации, уходу и установке (24 страниц), Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации, уходу и установке (24 страниц), Инструкции по эксплуатации и установке (29 страниц), Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (8 страниц)

Печатать страницу
Bosch Instructions for Use Руководство по установке

Checking the wall

The wall must be level, vertical and adequately load-bearing.
■
The depth of the bore holes must be the same length as the
■
screws. The wall plugs must have a secure grip.
The enclosed screws and wall plugs are suitable for solid
■
brickwork. Suitable fasteners must be used for other
structures (e.g. plasterboard, porous concrete, poroton
bricks).
The max. weight of the extractor hood is 40 kg.
■

Installation

Preparing for installation

Caution!
Ensure that there are no electric wires, gas or water pipes in the
area where holes are to be made.
Mark a vertical centre line on the wall from the ceiling to the
1.
lower edge of the extractor hood.
2.
Mark the positions for the screws and the contour of the
attachment area.
Drill 8 mm Ø holes to a depth of 80 mm and press the wall
3.
plugs flush with the wall.
Screw on the fixing bracket for the flue duct.
4.
Screw in 2 securing screws with washers to approx. 5 mm.
5.
10
¨
©

Electrical connection

:
Risk of electric shock!
Components inside the appliance may have sharp edges.
These may damage the connecting cable. Do not kink or pinch
the connecting cable during installation.
The required connection data can be found on the rating plate
inside the appliance; to do this, remove the metal mesh grease
filter.
Length of the cable: approx. 1.30 m
This appliance complies with the EC interference suppression
regulations.
This appliance may be connected to a correctly installed
earthed socket only.
Attach the earthed socket preferably inside the flue duct.
The earthed socket should be connected via its own circuit.
■
If the earthed socket is no longer accessible following
■
installation of the appliance, a disconnecter must be fitted as
for a permanent connection.
If a permanent connection is required, the installation must
feature an all-pole disconnecter (circuit breakers, fuses and
contactors) with a min. 3 mm contact opening. The permanent
connection may be installed by an electrician only.
$
[
ª
$
$
$
$
$
$
!
!
%
%
&