Community C4 Руководство по установке и эксплуатации - Страница 18
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Динамики Community C4. Community C4 20 страниц. 4.5", 6.5", 8" full-range c series coaxial ceiling loudspeakers
Также для Community C4: Руководство по установке и эксплуатации (16 страниц)
Печатать страницу
Painting the Loudspeaker
These loudspeakers' textured white inish
complements most decors and does not re-
quire further painting. However, if the inte-
rior design requires a custom loudspeaker
inish, these loudspeakers are easy to paint.
It's best to paint the baf le before installation.
In cases where it needs to be inished along
with the ceiling, the loudspeaker baf le can be
painted after mounting in the ceiling.
Note: The paint masks provided by Community
are intended to PREVENT the loudspeakers
from receiving any paint.
Type of Paint
The loudspeaker's ABS plastic baf le accepts
almost any type of latex or oil based paint.
We recommend application of two coats.
Painting Process
Follow this procedure to obtain the best
results:
1. Clean the baf le with a light solvent such
as mineral spirits, rubbing the baf le with a
lightly dampened cloth. Do not use abrasives
such as sandpaper or steel wool.
Caution: Use only light mineral
spirits thinner as a cleaner. NEVER
use gasoline, kerosene, acetone,
methyl ethyl ketone (MEK), paint
thinner, harsh detergents or other chemicals.
These chemicals and agents may
permanently damage the loudspeaker and
some are also toxic and highly lammable.
Community Commercial Design Series
2. Mask the loudspeaker so that the sur-
round, cone and center area will not receive
any paint. If the loudspeaker is already in the
ceiling, you may wish to mask the ceiling as
well. Use a low-tack painter's tape (typically
blue in color) to avoid damaging the loud-
speaker surround when the tape is removed.
We advise against using conventional mask-
ing tape and NEVER use duct tape in this
application; these kinds of tape generally
leave adhesive residue that can be dif icult to
remove and that may actually cause damage.
3. After cleaning, apply two or more two
thin coats of either latex or oil-based paints.
Latex paint will adhere better if an oil-based
primer is used irst. Apply the paint with a
roller or brush, or spray it on.
4. The grille should be painted separately,
and when it is not in place on the loudspeak-
er. We further recommend that you remove
the grille's internal cloth mesh, then spray
paint the grille assembly. Avoid using a roller
or brush to paint the grille as its metal perfo-
rated holes may become clogged with paint,
which degrades sound quality and also may
attenuate the sound. Reinstall the internal
cloth mesh (or if damaged install a new cloth
mesh).
Installation and Operation Manual
Page 18