Community Distributed Design DS8 Установка и эксплуатация Техническое обслуживание Руководство пользователя - Страница 10
Просмотреть онлайн или скачать pdf Установка и эксплуатация Техническое обслуживание Руководство пользователя для Динамики Community Distributed Design DS8. Community Distributed Design DS8 12 страниц. Distributed design series surface mount loudspeakers
Также для Community Distributed Design DS8: Руководство по установке и эксплуатации (12 страниц)
Печатать страницу
Optional wall box mounting
While Community Professional does not
require or include a wall box or mounting
plate with the loudspeakers, local building
and safety codes may specify these items. If
necessary, you can mount the IAB bracket
approximately as shown here. The DS-WMP
wall mount plate shown may be ordered as
an option from Community. Use appropriate
mounting hardware and fasteners, and
secure per the steps below, making sure
the installation is in accordance with the
applicable codes.
1. Pull the wires though the cutout in the
wall plate.
2. Attach the wall plate to the box using the
provided screws.
3. Secure the wires to the connector in the
base of the IAB bracket.
4. Attach the IAB bracket to the wall using
an appropriate mounting method.*
Painting the Loudspeaker
These loudspeakers' ABS plastic cabinets
Type of Paint
accept almost any type of latex or enamel
(oil based) paint. We recommend application
of two coats. Note however that painting the
grille requires spray painting.
Follow this procedure to obtain the best
Painting Process
results:
1. Remove the grille.
2. Clean the grille assembly and the loud-
speaker cabinet by rubbing them with a
lightly dampened cloth. Do not use abrasives
such as sandpaper or steel wool.
Caution: NEVER use abrasives,
ethyl ketone (MEK), paint thinner,
gasoline, kerosene, acetone, methyl
harsh detergents or other
chemicals. These chemicals and
agents may permanently damage
Community Distributed Design Series
Surface Mount Loudspeakers
Infin-A-Ball (IAB)
Mounting Bracket
*See
note
below
*Note: The fasteners that
secure the IAB bracket are
to be specified and provided
by the installer.
the finish. Some are also toxic and highly
flammable.
3. Mask the loudspeakers so that the sur-
rounds, cones and center areas will not
receive any paint. We advise against using
conventional masking tape and NEVER use
duct tape in this application; these kinds of
tape generally leave adhesive residue that
can be difficult to remove and that may actu-
ally cause damage. Painters tape is best.
4. After cleaning, apply two or more thin
coats of either latex or oil-based paints.
Latex paint will adhere better if an oil-based
primer is used first. Apply the paint with
a roller or brush, or spray it on, except as
noted below.
5. Use ONLY spray paint on the grille assem-
bly; using a roller or brush to paint the grille
is apt to cause its metal perforated holes to
become clogged with paint. The grille should
be painted separately, when it is not in place
on the loudspeaker.
Installation and Operation Manual
Wall Plate
(optional)
Wall board
(e.g.., drywall,
paneling, etc.)
Page 10