Bosch Nexxt Premium Gas Series Руководство по эксплуатации, уходу и установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации, уходу и установке для Сушилка Bosch Nexxt Premium Gas Series. Bosch Nexxt Premium Gas Series 28 страниц.

Печатать страницу
Electrical
connection
GROUNDING
iNSTRUCTiONS
This appliance
must be grounded.
In the event of a malfunction
or
breakdown,
grounding
wilt reduce
the risk of electrical shock by
providing
a path of least resistance
for the electric current.
This appliance
features a cord with
an equipment-grounding
conductor
and a grounding
plug. The plug
must be plugged into an
appropriate
outlet which has been
properly
installed and grounded
in
accordance
with all tocal
regulations
and ordinances.
Improper
connection
of the
equipment
grounding
conductor
may result in electric shock.
Have the appliance
checked
by
a qualified electrician
or service
technician
if you are in doubt as
to whether the dryer has been
properly grounded.
Do not modify the plug provided
with the appliance
if it will not fit in
the outlet, have a proper outlet
installed by a qualified electrician
or
exchange
the cord with an
appropriate
one rated for the dryer.
You wilI find the rating plate on the
inside of the front panel,
Connection
specifications
as well
as the required fuses are stipulated
on the appliance
nameplate.
Make sure that:
the power cord plug fits into the
socket.
the power cord is acceptable
for use in this application,
the grounding
system is
properly
installed.
The power cord may be replaced by
an electrician
only.
Replacement
power cords are
available from Customer
Service.
Volts
Hertz
Amperes
Watts
110-120
60
9
1200
Gas connection
Explosion hazard!
Use a new AGA or CSA
approved
gas supply line.
Install a shut off valve.
Securely tighten all gas
connections.
Have a qualified person make
sure gas pressure
does not
exceed
14 in. W.C./3.49
kPa/
0.506 psig. (Natural Gas).
Example of a qualified person
include:
licensed heating personnel,
authorized
gas supplier
personnel,
authorized
service personnel.
Failure to do can result in
explosion
or fire.
Risk of death or injury!
All gas line connection
must be
tested for leaks prior to appliance
operation,
Apply soapy water to gas
line connections
and check for
formation
of new bubbles,
Bubbles
indicate leak!
When installing the gas supply to
the gas dryer inlet pipe, do not
exceed 310 tbf in (35 Nm).
The dryer must only be
connected
to an individual
branch circuit via a socket which
has been properly
installed and
grounded.
The household
electrical voltage
must correspond
to the voltage
specification
on the dryer (rating
plate).
Never use an open flame to test
for gas leaks.
Gas type
This dryer is equipped
for use with
NATURAL GAS.
Your dryer must have the correct
valve for the type of gas in your
home. Valve information
is located
on the rating plate behind the door
below the port hole.
If the rating plate information
does
not agree with the type of gas
available, contact your dealer or our
costumer
service team
(see page 27).
8