Community HSB3-BFR22 Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель Community HSB3-BFR22. Community HSB3-BFR22 12 страниц. Balancepoint flyware for point source and subwoofer loudspeakers models ip8, ip6, is8, and is6, dual vertical splay with extension kit for 2-way models

Печатать страницу
VERTICAL ARRAYS
VSB-SBR54
- Dual Vertical Splay with Extension Kit for 2-way Models
(Vertically array two 2-way loudspeakers with subwoofer(s) behind)
APPLICATION: Suspend and vertically array two full-range 2-way loudspeakers
(landscape orientation) with a subwoofer behind; connected with BalancePoint™
Fly Rails.
PREASSEMBLY:
Confirm that the 8mm hardware on the cabinet brackets is the correct position
(See bolt pattern diagram below).
ASSEMBLY:
The array should be assembled from the top down by attaching the brackets
and rails to what will be the top cabinet and then suspending it and adding
the lower cabinet. After the lower full-range loudspeaker is connected the
subwoofer can be lifted into position and attached to the rails.
Parts:
PH
PP-1
PR-3: 54" BalancePoint™ Fly Rails (2)
PP-1: Universal Mounting Plates (4)
PB-2: Dual L Brackets (2)
PB-3: Cabinet Brackets (4)
PH: Hinge Brackets (4=2 preassemblies)
Hardware:
Qty
Code
Description
4
HH6
6 x 25 mm Hex Hd Bolts
4
HN6
M6 Locknuts
8
HW6
6mm Flat Washers
2
HH8-3 8 x 30 mm Hex Hd Bolts
20
HF8-3 8 x 30 mm Flat Hd Bolts
24
HW8
8mm Flat Washers
22
HN8
M8 Locknuts
2
HH1-12 10 x 120 mm Hex Hd Bolts
12
HF1-3
10 x 35 mm Flat Hd Bolts
4
HW1
10 mm Flat Washers
2
HN1
M10 Locknuts
Some hardware listed above will be
included in plate and hinge preassemblies.
Note: One additional full-range cabinet may be
added to the array by using one HVS kit, or an
additional sub can be added by using a TPK kit.
Kit Weight: 37.0 lb (16.8 kg)
I SERIES
1
IP6/8-1122
PR-3
PB-2
PB-3
Figure 1. After removing the applicable cabinet bolts, place upper cabinet brackets
(with flat head bolts inserted) on the cabinets as shown - note position of top bolts
2
IP6/8-1122
HN8
PB-3
HF1-3
Left
PB-2
HW8
Figure 2. Attach the L brackets to the cabinet brackets
- note which holes in the L bracket to use
BalancePoint™ Flyware
1
IP6/8-1152
PB-3
HF1-3
2
IP6/8-1152
Right
Left
Upper Cabinet
HN8
HW8
Right
PB-2
Upper Cabinet
Page 3