ANDI WMA 7612 L Разборка - Страница 3

Просмотреть онлайн или скачать pdf Разборка для Стиральная машина ANDI WMA 7612 L. ANDI WMA 7612 L 14 страниц.

-Detach the inner cover from the outer cover without damaging it.

-For reassemblying the front door, put the outer cover down the bright side facing the

workbench. Place the handle together with its pins on to the outer cover. Place the

hinge together with its plastic bushings in the outer cover. Put the glass on the outer

cover so that the gap at the peripheral of the door glass can be matching the

protrusion of the hook cover. Mate the inner cover with outer cover.

The two

protrusions on the outer cover near handle area are inserted to the corresponding

holes on the inner cover. Hook, hook pin and the hook spring are placed inside the

bearing on the inner cover. Then the hook cover is placed and all the screws are

fixed.

Figure 1c

5- BELLOW (from front panel)

• Press door open knob to open the front door.

• Remove the bellow clamp that fixes the bellow to the front panel.

• Remove the bellow from the front panel.

6- KICK PLATE

• Twist the plastic screws that attach the kick-plate to the body 90º anti-clock

wise and remove. ( Figure 2 a,b )

Figure 2/a

Figure 2/b