Bosch WTW87560TR Руководство по установке и эксплуатации - Страница 36
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Сушилка Bosch WTW87560TR. Bosch WTW87560TR 44 страницы.
Также для Bosch WTW87560TR: Руководство по установке и эксплуатации (32 страниц)
Печатать страницу
Information on the display
en
Y
Information on the display
I n f o r m a t i o n o n t h e d i s p l a y
Faults
ð on the display and
drying has stopped.
é on the display.
ó on the display.
The display goes out and
Başlat/Beklet (Start/
Pause) A flashes.
* Depending on how the appliance is equipped or the available accessory
--------
If you cannot rectify the fault yourself by turning the appliance off and then on
Note:
again, please contact our after-sales service.~ Page 42
3
Help with the appliance
H e l p w i t h t h e a p p l i a n c e
Faults
Appliance does not start.
Creasing.
Water is leaking out.
Programme duration dis-
played changes as dry-
ing progresses.
36
Cause/remedy
Empty the condensation container and reinsert it.~ Page 28
■
Press Başlat/Beklet (Start/Pause) A.
Once you have installed the optional drain hose*, make sure that it:
■
Is correctly connected
Is free of kinks
Is not blocked or clogged, e.g. with deposits
Remove the fluff.~ Page 29
Press Başlat/Beklet (Start/Pause) A.
Not a fault. The heat exchanger is being cleaned automatically. Do not pull out
the condensation container while this is displayed.
Not a fault. Energy saving mode is active .
Cause/remedy
Check the mains plug and fuse.
■
Check whether a programme has been selected.
■
Check that the appliance door is closed.
■
Check whether the childproof lock is activated. If it is, deactivate the child-
■
proof lock.~ Page 15
Check whether a "Ready in" time has been selected. If it has, this will delay
■
the start of a selected programme.
Load exceeded or incorrect programme selected for a type of fabric. All the
■
required information can be found in the programme table.~ Page 21
Remove laundry from the drum as soon as the drying programme has fin-
■
ished. Creasing occurs when clothing is left in the drum.
The appliance may be positioned at an angle. Level the appliance.~ Page 13
Not a fault. The moisture sensor measures the residual moisture in the laundry
and adjusts the programme duration (with the exception of timed programmes).