DreamSourceLab DSTouch Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Испытательное оборудование DreamSourceLab DSTouch. DreamSourceLab DSTouch 3 страницы. Ultra-portable touchscreen oscilloscope

Печатать страницу
DSTouch
Ultra-portable Touchscreen Oscilloscope
Quick Start Guide
Probe Extension Port
Probe Compensation
Reference
Signal Generator
BNC Connector
mcx Port
Auto
Run
/
停止
Stop
停止
Extension Port
Power Button
Charging Indicator
Type-C Port
Power Indicator
®
0.Introduction
DSTouch oscilloscope e combines the high performance of a des
ktop oscilloscope with the touch screen experience of a smartphone. I
n terms of performance, it utilizes FPGA-based hardware waveform en
gine architecture, and a large storage depth based on DRAM. In terms
of operation, it creatively designed a set of "single-finger touch" metho
ds, simplifying all functions into 1-3 tap and swipe operations
DSTouch oscilloscope is equipped with a built-in high-capacity lit
hium battery, making it an ideal palm-sized portable instrument.
1. Power On/Off
To prevent accidental power on/off caused by touching the powe
r button, DSTouch provides a long press power button to switch on/of
f and touch screen shutdown function
 Button Power On/Off:
Press & hold 1s to power on
Press & hold 3s to power off
）:
 Touch Power Off（
→
→
1
Tap battery icon
2
Tap power off
3
Swipe right to turn off
2. Run/Stop
DSTouch oscilloscope has physical and touch buttons for easy ru
n/stop control, meeting common usage needs.
 Button Run/Stop:
Run/Stop Acquisition
）:
 Touch Run/Stop（
1
Run/Stop Acquisition
3. Probe
BNC interface on DSTouch allows compatibility with all standard
BNC probes, expanding usability.
 Probe compensation:
Connect probe to oscilloscope's compensation reference signal.
Adjust probe compensation capacitor until waveform matches
desired display.
 Probe attenuation
Match probe attenuation w
ith oscilloscope channel probe r
atio during use.
4. Autoset
DSTouch Oscilloscopes offer powerful autoset features for conve
nient and stable display of measured waveforms with a single button
press.
 Button Autoset:
Press this btn to autoset
）:
 Touch Autoset（
→
1
Choose auto channel
2
Tap the auto btn
5. Auto measurement
DSTouch oscilloscope simplifies adding/removing measurement
s on traditional scopes. Just a few taps to add/delete auto measurem
ents from a menu of 20 commonly used options.
）:
 Measurement Selection（
→
→
3
2
Choose MEAS Items
Choose MEAS CH
1
Choose display position for MEAS