Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor Оперативная информация

Просмотреть онлайн или скачать pdf Оперативная информация для Сверло Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor. Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor 3 страницы. Bosch demolition hammer parts list
Также для Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor: Краткое справочное руководство (25 страниц), Руководство по эксплуатации/безопасности (29 страниц), Список деталей (2 страниц), Руководство по эксплуатации/безопасности (33 страниц), Руководство по эксплуатации/безопасности (33 страниц)

Hammerdrill, nonrot - Bosch 11316EVS

Operating Information

IMPORTANT:

Electric tools may use any number of symbols to designate electrical specifications. Proper interpretation of

these symbols will allow you to operate the tool better and safer. Please study these symbols on the following link and

learn their meaning:

Electric Tool Symbols

SLIDE "ON-OFF" SWITCH

The tool is switched "ON" by the slide switch 9 located in the rear handle. TO TURN THE TOOL "ON" slide the switch to the

right. TO TURN THE TOOL"OFF " slide the switch to the left.

VARIABLE SPEED DIAL

Your tool is equipped with a variable speed dial. The impact rate (BPM) and rotating speed (RPM) can be varied according

to the type of work being performed by setting the variable speed dial to the selected setting. The chart below will help

you to determine which setting to use for your application. However, a pre-test will determine the best speed setting, as

the chart is intended only as a guide. Once the proper setting is determined the impact rate and rotating speed is kept

constant by means of the "Electronic Feedback Circuitry". The variable speed dial can be adjusted while the motor is

running with the tool free from work, allowing the operator to adjust the impact rate and rotating speed according to the

actual application.

Chipping (Demolition)