Comnet CWFE2SCS2 Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Медиаконвертер Comnet CWFE2SCS2. Comnet CWFE2SCS2 4 страницы. Commercial grade 10/100 mbps ethernet 2 port electrical-to-optical media converter
Также для Comnet CWFE2SCS2: Руководство по установке и эксплуатации (12 страниц), Руководство по установке и эксплуатации (10 страниц)
Печатать страницу
QUICK START GUIDE
Front Panel
The Front Panel of the ComNet CWFE2SC(M)(S)2 consists of one RJ45 Port (Auto MDI/MDIX),
6 LED Indicators (UTP 100, LK/ACT, FDX/COL, Fiber LK/ACT, FDX/COL and PWR) and one fiber
100Base-FX Port.
LED Indicators
There are 6 diagnostic LEDs located on the Front panel of the media converter. They provide real-
time information of system and optional status. The indicator includes Power, UTP 100, LK/ACT,
FDX/COL, Fiber LK/ACT, FDX/COL. The following table provides description of the LED status and
their meanings.
LED
Color
PWR
Green
100
Green
LK/ACT (UTP)
Green
Green
LK/ACT (Fiber)
Green
Green
FDX/COL (UTP)
Orange
Orange
FDX/COL (Fiber) Orange
Orange
TECH SUPPORT: 1.888.678.9427
Fast Fiber Converter Module - SC Model
Status
Description
On
Power On
On
100 Mbps UTP Speed
Off
10 Mbps UTP Speed
On
The unit is linking with its link partner.
Blinking
The unit is transmitting or receiving packets from UTP devices.
Off
No device attached
On
The unit is linking with its link partner.
Blinking
The unit is transmitting or receiving packets from FX devices.
Off
No device attached
On
The UTP port is operating in full-duplex mode.
Blinking
Collision of packets is occurring in the port.
Off
Half-duplex mode or no device attached.
On
The fiber port is operating in full-duplex mode.
Blinking
Collision of packets is occurring in the port.
Off
Half-duplex mode or no device attached.
CWFE2SC(M,S)2
QSG_CWFE2SC(M,S)2 Rev. 11.17.17 PAGE 2