Comnet FVT10D2I1C4E Руководство по установке и эксплуатации
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Медиаконвертер Comnet FVT10D2I1C4E. Comnet FVT10D2I1C4E 10 страниц. 10-bit digitally encoded video
Печатать страницу
INSTALLATION AND OPERATION MANUAL
FVT/FVR10D2I1C4E
10-BIT DIGITALLY ENCODED VIDEO
+ 2 BI-DIRECTIONAL DATA + AIPHONE
INTERCOM
™
+ 4 CONTACT CLOSURE
+ 100MB ETHERNET
+ REDUNDANT POINT-TO-POINT DUAL SFP OPTICAL PORTS
The FVT/FVR10D2I1C4E series utilize 10-bit digital video encoding and decoding
for high-quality video transmission that meets the requirements of EIA RS-250C
for short-haul video transmission. These environmentally hardened units provide
transmission of one video channel and two bi-directional data channels. They also
provide transmission of one Aiphone
intercom channel and four contact closure
™
channels with tamper supervision in addition to one 10/100Mb Ethernet channel.
The ComNet
FVT/FVR10D2I1C4E has dual optical (SFP) ports to provide a redundant
™
point-to-point fail safe topology in the event of loss of one fiber or one optical module.
Operational status can be monitored by using the web management interface
through the addition of the ComNet network managed chassis and network
management interface module.
Bi-color (red/green) LED indicators are provided for confirming operating status in
addition to alarm contacts for fault monitoring. See Figure 15 on Page 9 for LED
explanations.
Packaged in the exclusive ComNet ComFit housing, these units may be either wall
or rack-mounted (using ComNet C2 network-managed rack), or may be DIN-rail
mounted by the addition of ComNet model DINBKT1 adaptor plate. See Figure A on
Page 10 for mounting instructions.
INS_FVT/FVR20D2I1C4E_REV- 06/22/12 PAGE 1