Bosch Compact Rotary Hammer 11536C Руководство по эксплуатации/безопасности - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации/безопасности для Сверло Bosch Compact Rotary Hammer 11536C. Bosch Compact Rotary Hammer 11536C 45 страниц. Cordless hammer drill
Также для Bosch Compact Rotary Hammer 11536C: Руководство по эксплуатации/безопасности (45 страниц)
Печатать страницу
BM 1619929800 01-08
If the red indicator light is "ON",
the battery pack is too hot or cold
for fast-charging. The charger
will automatically switch to fast-charging once
a suitable temperature is reached.
CHARGING BATTERY PACK (BC830 1 HOUR CHARGER)
Plug charger cord into your standard power
outlet, then insert battery pack into charger
(Fig. 12).
The charger's green indicator light will begin to
"BLINK". This indicates that the battery is
receiving a fast charge. Fast-charging will
automatically stop when the battery pack is
fully charged.
When the unit beeps and the indicator light
stops "BLINKING" (and becomes a steady
green light) fast charging is complete.
The battery pack may be used even though
the light may still be blinking. The light may
require more time to stop blinking depending
on temperature. When you begin the charging
process of the battery pack, a steady red light
FIG. 12
RED LIGHT
GREEN LIGHT
1/8/08
9:39 AM
BATTERY PACK
Page 13
If the red indicator light is
"BLINKING", the battery pack
cannot accept a charge or the
contacts of the charger or battery pack are
contaminated. Clean the contacts of the
charger or battery pack only as directed in
these operating instructions or those supplied
with your tool or battery pack.
could also mean the battery pack is too hot or
too cold.
The purpose of the green light is to indicate
that the battery pack is fast-charging. It does
not indicate the exact point of full charge. The
light will stop blinking in less time if the battery
pack was not completely discharged.
When needed, the internal fan of the charger
will turn on to aid the charging process and
speed.
When charging several batteries in sequence,
the charge time may slightly increase.
When the battery pack is fully charged, unplug
the charger (unless you're charging another
battery pack) and slip the battery pack back
into the tool.
CHARGER
-13-