Bosch GBH 2-22 RE PROFESSIONAL Оригинальное руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Сверло Bosch GBH 2-22 RE PROFESSIONAL. Bosch GBH 2-22 RE PROFESSIONAL 46 страниц. Professional
Также для Bosch GBH 2-22 RE PROFESSIONAL: Руководство по эксплуатации (50 страниц), Оригинальное руководство по эксплуатации (9 страниц)
Печатать страницу
OBJ_BUCH-795-004.book Page 7 Friday, August 23, 2013 12:16 PM
Hammer Safety Warnings
Wear ear protectors. Exposure to noise can cause hear-
ing loss.
Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Technical Data
Rotary Hammer
Article number
Speed control
Right/left rotation
Rated power input
Output power
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools
Intended Use
The machine is intended for hammer drilling in concrete,
brick and stone. It is also suitable for drilling without impact in
wood, metal, ceramic and plastic. Machines with electronic
control and right/left rotation are also suitable for screw-
driving.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Rotational direction switch (GBH 2-22 | RE)
5 Handle (insulated gripping surface)
6 Lock-on button for On/Off switch
7 On/Off switch
8 Release button for drilling/hammer drilling selector
switch (GBH 2-22 S | E | RE)
9 Selector switch for drilling/hammer drilling
(GBH 2-22 S | E | RE)
10 Button for depth stop adjustment
11 Depth stop
12 Auxiliary handle (insulated gripping surface)
13 Wing bolt for adjustment of auxiliary handle
14 Securing screw for key type drill chuck*
15 Key type drill chuck*
16 SDS-plus adapter shank for drill chuck*
17 Extraction sleeve of the dust extraction attachment*
18 Clamping screw for the dust extraction attachment*
19 Depth stop of the dust extraction attachment*
20 Telescopic pipe of the dust extraction attachment*
21 Wing bolt of the dust extraction attachment*
22 Guide pipe of the dust extraction attachment*
23 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GBH 2-22
GBH 2-22 S
Professional
Professional
3 611 B50 1..
0 611 250 0..
W
620
W
280
English | 7
GBH 2-22 E
GBH 2-22 RE
Professional
Professional
0 611 250 6..
0 611 250 7..
–
–
–
620
620
280
280
1 619 P11 523 | (23.8.13)
620
280