Comnet FVR15M2 Инструкции по установке - Страница 3
Просмотреть онлайн или скачать pdf Инструкции по установке для Трансивер Comnet FVR15M2. Comnet FVR15M2 5 страниц.
Печатать страницуINSTALLATION INSTRUCTIONS
Communication Networks
3 Corporate Drive • Danbury, CT 06810 • USA
Tel: 203-796-5300 • Toll Free: 1-888-678-9427
www.comnet.net
LEDS:
RED = "No Activity"
GRN = "Activity"
NOTE:
RED DOES
NOT MEAN "Error"
WARNING: Unit is to be used with a Listed Class 2 or LPS power supply rated 9-12 VDC @ 1A.
WARNING: This unit should be installed in a restricted access location; available through the use of a lock and key or other
means of security. Access should be limited to service personnel who have been instructed about the reasons for the restrictions
to the location. Any and all precautions should be taken and controlled by the authority responsible for the location.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,
the operating ambient temperature of the rack environment may be greater than room ambient.
Therefore, consideration should be given to installing the equipment in an environment compatible with
the maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow
required for safe operation of the equipment is not compromised.
FVR15M2
VIDEO WITH RETURN DATA
TWO MULTIMODE
OPTICAL FIBERS
BLACK WITH WHITE STRIPE
BLACK
NOTE: Remove Electrical Connector
for Rack Mount Units
INS_FVT/FVR15M2_REVA
03/04/09
Page 3