Dremel MS20-01 Руководство по эксплуатации/безопасности - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации/безопасности для Пила Dremel MS20-01. Dremel MS20-01 20 страниц.

Find Quality Products Online at:

Assembling Base Station for

Stationary Use

Disconnect the plug from

WARNING

the power source before

making any assembly, adjustments or

changing accessories. Such preventive

safety measures reduce the risk of starting

the tool accidentally.

Mount the Base Station to a flat working

surface of a comfortable height. Insure that

the working surface is of a thickness that can

accept the clamps and/or mounting screws.

Mounting the Base Station to an unstable

surface can invite an accident.

1. Position the saw station at the front edge

of the flat work surface the saw station will

be clamped to.

2. Unthread the provided clamps to ensure

they will be able to clamp to the work

surface. Slide the flat edge of the clamp

into the slot in the bottom of the saw

station and tighten the clamp to prevent

the saw station from shifting during use,

Fig. 6.

The base can be permanently secured to a

work bench with regular screws through

the two holes located on the top of the

base, Fig. 7.

3. Feed the Moto-Saw cord through the hole

in the center of the base, Fig. 8.

4. Lower the Moto-Saw to the saw station

surface then push forward until it clicks

into the locked position, Fig. 9.

FIG. 8

GlobalTestSupply

www.

FIG. 6

FIG. 7

.com

FIG. 9