dreo DR-HSH005 Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Нагреватель dreo DR-HSH005. dreo DR-HSH005 15 страниц. Oil-filled heater
Печатать страницу
Operations and Functions
Place the heater on a firm, level surface free from obstructions,
and at least 3ft. (0.9m) away from any wall or combustible
materials.
Plug into an appropriate voltage AC 120V outlet, The unit will
enter standby mode with a beep and power indicator on red.
Your heater is ready for use now.
Power ON/OFF
When the unit is plugged in, press
/ remote control to turn the heater on with default
settings: 95°F and high mode (
LED display.
Press once again to turn the heater off.
Mode / Heat Level Settings
When the unit is on, repeatedly press
heater to cycle through High -> Medium -> Low -> ECO
modes, OR simply press
control for mode switch.
ECO Mode
When ECO mode is on, the heater will adjust the
working mode automatically based on the ambient
temperature.
Mute/Unmute
Press
on the remote control to turn the buzzer
on/off.
12
on the heater
) on the
on the
or
on the remote
Temperature Adjustment
When the unit is on, press 图图or 图图on the
heater / remote control to adjust the set
temperature from 40 to 95°F in 1°F increments.
When the ambient temperature reaches the
set temperature, the heating element will stop
running and the indicator 图 will go off.
Note:
after the unit is turned off, the heater will continue
radiating heat for a while because of the unique
properties of diathermic oil.
When the ambient temperature is lower than
the set temperature, the heater will start
running again.
Timer
When the unit is running, press
remote control to enter timer setting.
Press
or
to select a time (00h-24h) and
press
again to start the timer.
When the timer ends, the heater will
automatically shut off and go into standby.
Note:
1.
If you set the timer when the unit is on standby, the
heater will automatically start running when the
timer ends.
2.
Press the power button
Child Lock
When the unit is on, hold
same time for 2 seconds to enable/disable Child
Lock.
Note:
1.
All the buttons will be locked when Child Lock is enabled.
2.
Child Lock is not applicable to the remote control.
on the heater /
to end the timer immediately.
and
at the
13