Atlantic Alcove Руководство по установке и эксплуатации - Страница 13
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Нагреватель Atlantic Alcove. Atlantic Alcove 18 страниц. Inertia radiator / cast iron heating element
Печатать страницу
In this case, to check that the scheduling orders are correctly transmitted, conduct the following checks:
Orders
No
Received
power
Signal to
transmit
Mode Obtained
COMFORT
For scheduling through the pilot wire or carrier power, freeze protection and load shedding orders have priority.
The delay for switching over from comfort mode to eco mode is about 12 seconds.
2.4 - Lock the Device on its Wall Bracket
- Place the device on bracket S as shown. - Move the device
towards the bracket then lift (arrows 1 and 2).
- Insert the bracket fl anges in the holes on the device and lower
(arrow 3).
- Lock by turning the two latches (V) half a turn, your device is
locked.
3 - Controls
3.1 - Familiarization
First check that the device is on. If it is off, press and hold the
Activate the screen by pushing any key.
You may choose the heating mode by pushing the
Flashing data has not yet been validated.
You may also set comfort and eco mode temperatures using the
For more information regarding the numerous possibilities offered by your device, please consult the following
sections in this Guide.
If you do not use the controls the screen goes into standby mode.
3.2 - Control Screen Description
Ventilation Functions
Command lock
230V for 3s
230V for 7s
COMFORT -1°C COMFORT -2°C
and
230V
-115V negative +115V positive
FREEZE
ECO
PROTECTION
Screen
and
keys
and
keys
OK/Validate -
Stop heating
Equilibrium
équilibre
Ventilation
Lock
OK
lkey to start.
keys and validating with
OK
and
keys then validating with
information line
Heat indicator
Display T°C
Modes
LOAD
SHEDDING
HEATING STOP
.
.
OK