Atlantic F129 Design CMG-BD 1 Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Нагреватель Atlantic F129 Design CMG-BD 1. Atlantic F129 Design CMG-BD 1 17 страниц. Electrical convector
Печатать страницу
- Lock the appliance onto latching bar. Place the appliance at an
angle on the supports S1. Pivot the appliance to place it on the
supports S2. Lower the appliance onto latching bar. The appliance
clicks in place, showing it is fixed and latched. To release the
appliance from the latching bar, use a flat-head screwdriver and push
the tongue (top left of the latching bar behind the appliance) towards
the wall. Lift the appliance while holding the tongue with the
screwdriver. Swing it forward then lift it off the supports S1.
Electric connection
- The power supply to the appliance is 220-240V, 50Hz/60Hz.
- In damp atmospheres, such as bathrooms and kitchens, the
junction box must be located at least 25 cm from the floor. The
appliance's power supply must be connected straight to the mains,
after the all-pole cut-off, with a contact opening gap of at least 3mm
with no intermediate switch. The appliance must not be earthed.
8