Electrolux KITE" 7 Segment Variant Руководство по эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Варочная панель Electrolux KITE" 7 Segment Variant. Electrolux KITE" 7 Segment Variant 14 страниц.

Печатать страницу

5.2

Alarmmanagement (Faultcodes)

5.2.1

Error codes for hobs with radiation-heated cooking zones

Error code

5.2.2

Error codes with hobs with induction heating

Please refer to Service Manual 599 519 523 for explanations on error displays in induction hobs.

Demo Mode/ Service Mode/ Alarm Error Mode

The deactivated state of the hob is the starting position.

Activate the On/Off sensor button for 3 seconds.

Activate the additional multizone connection/additional function connection sensor buttons for

both of the right cooking zones for 3 seconds. Note: the sensor buttons are not visible when

deactivated. Please refer to the manual for the exact position of the buttons. Confirmation with

an acoustic signal (2x "beep").

Pressing the timer sensor button once = DEMO MODE. This is shown by a "d" in the left timer

display.

Pressing the timer sensor button twice = SERVICE MODE. This is shown by an "s" in the left

timer display.

Pressing of the timer sensor button three times = ALARM/ ERROR MODE.

Pressing of the timer sensor button four times = return to DEMO MODE.

If a sensor button is not activated, the normal deactivation times described in Chapter 2 have

validity.

DGS-TDS-N 12.07 U. H. / A. B. © Electrolux

Error description

Configuration alarm

Input electronic configuration

error

Cooling fan not connected or

blocked

Disturbed communication

between the input electronic

and power electronic

Internal electronics error

- 13 -

Error remedy

Disconnect the appliance

from the mains, wait 10

seconds and restore power.

replace power electronic is

error still displayed

Replace input electronic

Check the cooling fan

induction module and

replace if necessary

Check the conencting cable

and replace if necessary,

replace input electronic if

unsuccessful-> Replace

power electronic

Replace power electronic

599 531 461 EN