Electrolux 316488524 Руководство по установке, использованию и уходу - Страница 10

Просмотреть онлайн или скачать pdf Руководство по установке, использованию и уходу для Вентиляционная вытяжка Electrolux 316488524. Electrolux 316488524 20 страниц. 30” and 36” free-standing range hood

Печатать страницу

Electrolux 316488524 Руководство по установке, использованию и уходу

Installing the hood

Install framing for hood support

• If drywall is present, mark the screw hole

locations. Remove the template.

• Cut away enough drywall to expose 2 vertical

studs at the holes location indicated by the

template.

Install two horizontal supports at least 1" x 6"

between two wall studs at the bottom and top

mounting holes installation location.

• The horizontal support must be flush with the

room side of the studs.

Use cleats behind both sides of the support to

secure to wall studs.

• Reinstall drywall and refinish.

IMPOR

IMPORT T T T T ANT

ANT

ANT- - - - - Framing must be capable of

ANT

supporting 100 lbs.

Framing must be capable of

8-1/2"min. opening for ductwork

View From Rear

Cleats

1"x6" Min.

Mounting

Support

Centerline of

Installation

Space

Mounting the hood

2 people are required to lift and position the hood

onto the mounting screws.

• Place the template on the wall along the horizon-

tal line, make sure the template is leveled and

centered with the centerline.

• Mark "upper" screw holes locations in the wall.

• IMPORTANT. Check to be sure that hole locations

are leveled and correctly centered by the vertical

centerline.

• Drive "upper" wood screws by hand. Leave ¼ " of

distance between the screw head and the wall.

• Remove the grease filter and mount the hood

onto the "upper" screws.

• Mark "lower" wood screw holes locations in the

wall using a pencil.