Electrolux CH 910 Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Вентиляционная вытяжка Electrolux CH 910. Electrolux CH 910 28 страниц. Stylish stainless steel chimney hood
Также для Electrolux CH 910: Книга инструкций (21 страниц)
6 electrolux
YOUR APPLIANCE AND OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
The cooker hood is designed to extract
unpleasant odours from the kitchen, it will not extract steam.
The hood can be switched on pushing directly onto the requested speed without
EN
fi rstly having to select 0/1 button.
Touch
Basic functions
Dual Function
L
When briefl y pressed it switches the lighting system on/off.
When pressed for 2 seconds it starts the lighting system
in "courtesy light" mode.The lamps are fed at a reduced
power of approximately 5W. Such function can be stopp-
ed by pressing the touch control for 2 seconds or just by
pressing it shortly in order to return to the normal lighting
mode. In courtesy light mode the touch control is not lit.
T1
When pressed the motor is stopped, regardless of the
speed it is set to.
T2
When pressed the motor is set to the fi rst speed
T3
By a brief pressing the motor is set to the second speed.
By pressing the touch control for approximately 2 seconds the
Delay function is enabled, i.e delayed shutdown of the appliance
ensuring a complete elimination of the residual odours. This
function can be activated at OFF- position and at 1°, 2° and
3°speeds. It can be stopped in advance by pressing any of the
touch controls (T) with the exception of T3. The Delay function
works according to the following scheme:
1°speed / OFF = 20 minuets
2°speed =15 minutes
3°speed = 5 minutes
T4
When pressed the motor is set to the third speed
T5
When pressed the motor is set to the intensive speed
timed to 5 minutes. At the end of 5 minutes of intensive
speed the hood starts again at the speed it was set to
previously. In case the hood is set to the intensive speed
directly from OFF-state it will then start from the fi rst
speed after 5 minutes of intensive speed.
F
When pressed for 4 seconds it resets the fi lter alarm s-
ignal indicated by fl ashing of the touch control T1.This
procedure can be carried out only when the motor is
stopped.
Indicator lights
Touch control unlit
Lights off
Touch control lit
Lights on
Touch control unlit
Courtesy light on
Touch control lit
Motor on
Touch control unlit
Motor off
Touch control lit
Touch control lit
Second speed on
Flashing touch control
Delay function on
Touch control lit
Touch control lit
Touch control lit
Metal grease fi lters saturation
alarm.Metal grease fi lters need to
be washed.The alarm starts up after
100 working hours.
Flashing touch control
Charcoal odour fi lter saturaion
alarm.Charcoal fi lter has to be
replaced and metal grease fi lters
washed.The alarm starts up after
200 working hours.(Activation; check
the paragraph "Odour fi lter")