Electrolux CHDI 8610M Инструкции по эксплуатации и установке - Страница 8

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Вентиляционная вытяжка Electrolux CHDI 8610M. Electrolux CHDI 8610M 20 страниц.

Печатать страницу

Maintenance and care

• The hood must always be disconnected from the electricity supply before

beginning any maintenance work.

Cleaning the hood

• Clean the outside of the hood using a damp cloth and a mild detergent.

• Never use corrosive, abrasive or flammable cleaning products.

• Never insert pointed objects in the motor's protective grid.

• Wash the outside surfaces using a delicate detergent solution. Never use caustic

detergents or abrasive brushes or powders.

• Only ever clean the switch panel and filter grille using a damp cloth and delicate

detergents.

• It is extremely important to clean the unit and change the filters at the recommended

intervals. Failure to do so will cause grease deposits to build up that could constitute a

fire hazard.

Metal grease filter

• The purpose of the grease filters is to absorb

grease particles which form during cooking

and it must always be used, either in the

external extraction or internal recycling

function.

Attention: the metal grease filters must be

removed and washed, either by hand or in the

dishwasher, every four weeks.

Removing the metal grease

filter

• First, push the metal grease filter stop

backwards, then extract the filter, pulling downwards. Fig. 3.

Hand washing

• Soak grease filters for about one hour in hot water with a grease-loosening cleaner,

then rinse off thoroughly with hot water. Repeat the process if necessary. Refit the

grease filters when they are dry.

Dishwasher

• Place grease filters in the dishwasher. Select the most powerful washing programme

and highest temperature, at least 65°C. Repeat the process. Refit the grease filters

when they are dry.

When washing the metal grease filter in the dishwasher a slight discolouration of the

filter can occur, this does not have any impact on its performance.

Fig. 3