Daikin VRVIII Series Руководство по техническим данным - Страница 12
Просмотреть онлайн или скачать pdf Руководство по техническим данным для Кондиционер Daikin VRVIII Series. Daikin VRVIII Series 20 страниц. Air conditioning systems bs box
Также для Daikin VRVIII Series: Руководство по техническим данным (20 страниц), Руководство по техническим данным (18 страниц), Руководство по техническим данным (11 страниц)
Печатать страницу
6
Dimensional drawing & centre of gravity
6 - 1 Dimensional drawing
FXMQ100,125P
40-ø 4.7 hole
(Suspention bolt position)
(All around)
Air Outlet
700 or more
(service space)
Inspection hatch 450 or more
Air outlet
Ceiling
FXMQ100,125P
FXMQ-P
40-ø 4.7 hole
(All around)
(Suspention bolt position)
• REMOTE CONTROL DIMENSIONS
Air Outlet
• INSTALLATION METHOD
700 or more
EXPOSED BODY, EXPOSED CORD
(service space)
Inspection hatch 450 or more
Staple
Remote control
Air outlet
Ceiling
• Indoor Units • CONCEALED CEILING UNIT • FXMQ-PVE
NOTES
1
Location of MANUFACTURE'S LABEL:
Control box surface
2
Mount the air filter at the suction side.
(Select its colorimethod (gravity method) 50% or
more)
48-ø 4.7 hole
3
Do not locate things should not be wet under the
(All around)
indoor unit.
Dews may droop when humidity reaches over 80%,
or a drain gets stuck, or air filters are not clean.
Air Inlet
View
(From the Air Outlet)
300 or less
Air Inlet
(Note 2)
(From the air inlet)
Floor surface
NOTES
1
Location of MANUFACTURE'S LABEL:
Control box surface
2
Mount the air filter at the suction side.
(Select its colorimethod (gravity method) 50% or
more)
48-ø 4.7 hole
3
Do not locate things should not be wet under the
(All around)
indoor unit.
Dews may droop when humidity reaches over 80%,
or a drain gets stuck, or air filters are not clean.
Air Inlet
EXPOSED BODY, EMBEDDED CORD
View
Conduit
(From the Air Outlet)
300 or less
Remote control
Air Inlet
(Note 2)
(Between
remote control
and control box)
Control box
(From the air inlet)
Floor surface
®
• VRV
Systems • Indoor Units
4
Space for Service Works
According to any one of below 1) - 3), secure a space for service works, such
as, checking and maintenance of control box and drain pumps, etc.
1) One inspection hatch (450x450) on the control box side and a space of
300mm or more under the unit. (Fig.A)
2) One inspection hatch (450x450) on the control box side and 2 (two)
inspection hatches under the unit (Arrow view B-1)
3) 3 (three) inspection hatches under the unit and the control box. (Arrow view B-2)
Control box
Inspection hatch
Ceiling
Inspection hatch (°450)
20 - 8x12 oblong hole
Control box
(All around)
Air
outlet
Fig. A
12 Drain hose (accessory)
11 Socket (for maintenance)
20 - 8x12 oblong hole
10 Hook
(All around)
9 Air suction flange
8 Air discharge flange
7 Power supply connection
6 Interunit wiring connection
5 Control box (inside)
4 Ground terminal (in control box)
3 Drain pipe connection
2 Gas pipe connection
1 Liquid pipe connection
ITEM PART NAME
4
Space for Service Works
N
OTE
According to any one of below 1) - 3), secure a space for service works, such
as, checking and maintenance of control box and drain pumps, etc.
1
Remote control cord and staple are not attached. They are field
supplied parts.
1) One inspection hatch (450x450) on the control box side and a space of
300mm or more under the unit. (Fig.A)
2) One inspection hatch (450x450) on the control box side and 2 (two)
inspection hatches under the unit (Arrow view B-1)
• Specifications of cord
3) 3 (three) inspection hatches under the unit and the control box. (Arrow view B-2)
Shield wire
Type
(insulated thickness: 1mm or more)
Control box
Size
Total
length
Inspection hatch
Ceiling
Inspection hatch (°450)
20 - 8x12 oblong hole
Control box
(All around)
Cord oulet hole
Air
outlet
Fig. A
EXPOSED BODY, EMBEDDED CODE
12 Drain hose (accessory)
11 Socket (for maintenance)
Remote control
20 - 8x12 oblong hole
10 Hook
(All around)
9 Air suction flange
8 Air discharge flange
7 Power supply connection
6 Interunit wiring connection
Through hole
5 Control box (inside)
4 Ground terminal (in control box)
3 Drain pipe connection
2 Gas pipe connection
1 Liquid pipe connection
ITEM PART NAME
<Inspection hatch>
(Ceiling opening)
Control box
Ceiling
Inspection hatch
Inspection hatch (450mmx450mm)
Control box
Inspection hatch 3
Control box
Air
inlet
or more
Inspection hatch 2
View B-1
View B-2
O.D. ø 32 (outlet)
VP25 (O.D. ø 32 /I.D. ø 25)
For M10
M4
VP25 (O.D. ø 32 /I.D. ø 25)
ø 15.9 flale connection
ø 9.5 flale connection
REMARK
3D060162
For Australia
For other countries
Vinyl cord with sheath or cable
<Inspection hatch>
(Ceiling opening)
(insulated thickness: 1mm or more)
Control box
0.75~1.25mm²
500m
Ceiling
Inspection hatch
Inspection hatch (450mmx450mm)
Control box
Inspection hatch 3
Control box
Air
inlet
or more
Inspection hatch 2
View B-1
View B-2
O.D. ø 32 (outlet)
VP25 (O.D. ø 32 /I.D. ø 25)
For M10
M4
VP25 (O.D. ø 32 /I.D. ø 25)
ø 15.9 flale connection
ø 9.5 flale connection
REMARK
3D028952
3D060162
141